Press at 150-160°C for 12-15 seconds at 40 PSI. Use medium/firm pressure. Cold peel (i.e. wait a few minutes for it to cool down before peeling).

No, it’s currently only available in silver.

SupaReflective is not an ANSI safety-rated product. However, it can be used to complement safety-rated garments. For example, you could add a reflective company logo to an accredited safety vest.

SupaReflective heat transfers can be used on cotton, polycotton blends, fleece, lycra, nylon, elastane and non-sublimated polyester. This makes it perfect for tees, hoodies, stretchy athleisure wear, cotton tote bags.

SupaReflective heat transfers are not designed for fabrics with waterproof coatings or anything with dye that could migrate, like patterned polyester or dark denim.

Yes, but only if you’re printing where the design won’t go over seams (e.g. on a five panel cap). If you want to print over seams, use our Headwear transfers. These are designed specifically for that, and will print beautifully over seams and even mesh without cracking. However, these are not currently available in a reflective transfer.

Yes, the minimum order for SupaReflective heat transfers is 10 identical pieces.

You bet. Like all of our transfers, they’re made from water-based inks, not plastic-based, and are OEKO-Tex certified, so you know they’re not harmful to you or the planet.

They’re independently proven to last 30 washes, ensuring durability and sustained reflectivity over time.

Like all of our transfers, the SupaReflective is a professional-grade heat transfer that can be air-operated or a manual heat press. However, it is NOT designed to be pressed with a domestic iron, or the Cricut Easy Press or other presses without adequate pressure settings.

Shop our presses here

No, we don’t charge any extra fees except shipping, which is calculated before checkout.

After you’ve placed your order, your transfers will leave our factory within 1-2 business days. Delivery times will vary depending on your location.