No heat marks. No problem.
Lo Melt is the best heat transfers for:
- Technical Fabrics.
Performance wear, including tri-blends, spandex, Dri-fit etc. - Premium Garments.
Nervous about scorching an expensive jacket? With Lo Melt, you don’t need to worry. - Water-resistant Items.
Promotional bags, outerwear and even shoes.
For sublimated polyester or fabrics you expect to bleed, we recommend our Lo Melt Blocker, which eliminates any dye migration.
Backed by world-class service.
If there’s an issue with your artwork, we’ll take care of it. Every order is shipped within 1-2 working days, and if you’re not 100% happy, we’ll make it right.
Will Lo Melt stick to fabrics with a water-resistant coating?
It will stick to water-resistant fabrics but not waterPROOF fabrics like polyurethane.
Do you have a Lo Melt Blocker?
Yes – it comes with a blocker version (LB), which should be used for fabrics you expect to bleed, like sublimated polyester and heavily patterned fabrics.
Will Lo Melt work on headwear?
Only if there are no seams where you’re pressing the transfer. Lo Melt will crack on seams, so if there are seams (e.g. six panel cap), use the Headwear transfer.
What's your delivery time for Lo Melt?
1 – 2 days.
Are there any hidden fees with Lo Melt?
Nope, just the cost of the transfers and shipping (which is calculated at checkout).
How do I order your Lo Melt transfers?
The same way you order our current products – just select LM (Lo Melt) or LB (Lo Melt Blocker).
What are the pressing instructions for Lo Melt?
Low Melt means a lower temperature, typically 260-270F for polyester. Press for 12 – 15 seconds at 40PSI/firm. Click here for instructions.
Are there minimums with Lo Melt?
Yes – x10 transfers or x10 gang sheets.
Is Lo Melt eco-friendly?
Yes – it is the same ink technology as our other products, which all use water-based inks without hidden plastics, certified by OEKO-TEK.